FBT JMaxX 112A
Comes with 5 Year Warranty!
- 2-way, bi-amplified bass reflex design cabinet
- 700W RMS LF, 200W RMS HF, Class D power amplifiers with switch mode power supply
- DSP with 4-EQ presets
- Control panel with: XLR IN and XLR LINK, Volume, EQ presets, HP filter, GND LFT switch
- 2 x M10 suspension points, 35mm (1.3/8") top-hat speaker stand socket, wall bracket mount flange plate
- 90 degree H x 60 degree V constant directivity horn
- Stage monitor angling facility with 12, 40 or 55 degree taper
- Configuration: 2 Way
- Built-in amplifier LF/HF: 700w/200w
- Frequency response: 48Hz - 20kHz
- Low Frequency woofer: 12" (2" VC)
- High Frequency driver: 1" (1" VC)
- Maximum SPL cont/peak: 131 dB
- Dispersion: 90 x 60
- Input connector: XLR + 6.3mm Jack
- Power cord: 5m IEC
- Net Weight: 13.8kg
Here we have the FBT JMaxX 112A speaker; part of FBT's latest range of speakers that follow on from their successful FBTMaxX series. The JMaxX 112A not only delivers a fantastic sound thanks to their in-built 700W + 200W Class D power amplifier and 12" woofer, but are also incredibly straightforward to use. The easily-accessible rear panel features volume control, EQ presets & filters, ground lift switch and XLR inputs & outputs making it simple to adjust the speaker to your specific needs. Thanks to its clever design the 112A can also be used as a wedge giving performers the opportunity to hear themselves with amazing clarity without the need to fork out on a whole new set of speakers.
The new FBT JMaxX series combines ease of use and versatility for many portable or installed sound applications: musicians, DJs, AVL contractors, rental sound reinforcement, corporate events, houses of worship, bars and clubs.
With its eye-catching gas-injected forms designed to virtually eliminate undesired enclosure resonance and reinforce strong low frequency performance, the JMaxX series of powered loudspeakers is available in three elegantly crafted two-way models: the 14-inch JMaxX 114A; the 12-inch JMaxX 112A; and the 10-inch JMaxX 110A. All are equipped with FBT's latest 90 x 60 degree HF horn design which delivers improved projection, accuracy, and dispersion of the mid and high frequencies.
Providing a myriad of possibilities for bands, DJs and solo artists, as well as for permanent installations, each JMaxX model is actually four loudspeakers in one. Derived from a decade of experience of portable sound reinforcement, the carefully tailored equalisation presets offer highly intelligible response for vocals and floor monitoring; slightly boosted response in lounge bar applications; punchy and forward sound for DJs and night venues; and a general-purpose EQ setting that mirrors the original and familiar FBTMaxX voicing.
Common to all JMaxX models is FBT's latest generation lightweight 700W + 200W Class D power amplifier with universal switch mode power supply, delivering abundant power and headroom to reproduce even the largest transients without distortion.
XLR inputs and outputs, volume control, the EQ presets and filters, and ground lift switch are all conveniently located on a clearly laid out rear panel, making loudspeaker setup and operation intuitive and consistently repeatable.
JMaxX's versatility is further underscored by the many mounting and fixing options that the ergonomically styled cabinets provide. Mounting in fixed installations is made easy using the M10 suspension points or wall bracket flange plates, while portable use is facilitated by the built-in 35mm pole mount socket.
There's no need for separate stage monitors, as JMaxX's cabinet profiles are designed with 12, 40, and 55 degree wedge angles, and when used with the specific floor monitoring EQ presets, will ensure that performers hear themselves with ultimate clarity.