FBT JMaxX 112A (Pair) with Stands & Cables
FBT JMaxX 112A Features & Specifications
- 2-way, bi-amplified bass reflex design cabinet
- 700W RMS LF, 200W RMS HF, Class D power amplifiers with switch mode power supply
- DSP with 4-EQ presets
- Control panel with: XLR IN and XLR LINK, Volume, EQ presets, HP filter, GND LFT switch
- 2 x M10 suspension points, 35mm (1.3/8") top-hat speaker stand socket, wall bracket mount flange plate
- 90 degree H x 60 degree V constant directivity horn
- Stage monitor angling facility with 12, 40 or 55 degree taper
- 700W + 200W - 131 dB SPL (peak)
- 12" LF woofer with 2 voice coil
- 1" exit throat HF compression driver with 1" voice coil
- Frequency response from 48Hz to 20 kHz
- Extremely lightweight: only 13.8Kg
Gorilla Speaker Tripod Stands Features and Specifications
- Pair of speaker stands with bag
- Strong and reliable steel construction
- Suitable for most active and passive PA speakers and has standard 35mm poles
- Black powder-coated finish
- Quick-and-simple construction
- No loose parts
- Superb quality and value
- Height: 100cm - 160cm
- Load Capacity: 45Kgs
- Material: Steel
- Finish: Black powder-coating
- Includes: 2 x stands, 1 x bag
This is a fantastic value package deal for a pair of FBT JMaxX 112A PA speakers. With this bundle you'll get everything you'll need for a basic speaker set up which is great for mobile DJs and events, and altogether comes with:
- 2x FBT JMaxX 112A
- 2x Gorilla Speaker Tripod Stands
- 1x Gorilla Speaker Stands Carry Bag
- 2x 6m XLR Cable
FBT JMaxX 112A
Here we have the FBT JMaxX 112A speaker; part of FBT's latest range of speakers that follow on from their successful FBTMaxX series. The JMaxX 112A not only delivers a fantastic sound thanks to their in-built 700W + 200W Class D power amplifier and 12" woofer, but are also incredibly straightforward to use. The easily-accessible rear panel features volume control, EQ presets & filters, ground lift switch and XLR inputs & outputs making it simple to adjust the speaker to your specific needs. Thanks to its clever design the 112A can also be used as a wedge giving performers the opportunity to hear themselves with amazing clarity without the need to fork out on a whole new set of speakers.
The new FBT JMaxX series combines ease of use and versatility for many portable or installed sound applications: musicians, DJs, AVL contractors, rental sound reinforcement, corporate events, houses of worship, bars and clubs.
With its eye-catching gas-injected forms designed to virtually eliminate undesired enclosure resonance and reinforce strong low frequency performance, the JMaxX series of powered loudspeakers is available in three elegantly crafted two-way models: the 14-inch JMaxX 114A; the 12-inch JMaxX 112A; and the 10-inch JMaxX 110A. All are equipped with FBT's latest 90 x 60 degree HF horn design which delivers improved projection, accuracy, and dispersion of the mid and high frequencies.
Providing a myriad of possibilities for bands, DJs and solo artists, as well as for permanent installations, each JMaxX model is actually four loudspeakers in one. Derived from a decade of experience of portable sound reinforcement, the carefully tailored equalisation presets offer highly intelligible response for vocals and floor monitoring; slightly boosted response in lounge bar applications; punchy and forward sound for DJs and night venues; and a general-purpose EQ setting that mirrors the original and familiar FBTMaxX voicing.
Common to all JMaxX models is FBT's latest generation lightweight 700W + 200W Class D power amplifier with universal switch mode power supply, delivering abundant power and headroom to reproduce even the largest transients without distortion.
XLR inputs and outputs, volume control, the EQ presets and filters, and ground lift switch are all conveniently located on a clearly laid out rear panel, making loudspeaker setup and operation intuitive and consistently repeatable.
JMaxX's versatility is further underscored by the many mounting and fixing options that the ergonomically styled cabinets provide. Mounting in fixed installations is made easy using the M10 suspension points or wall bracket flange plates, while portable use is facilitated by the built-in 35mm pole mount socket.
There's no need for separate stage monitors, as JMaxX's cabinet profiles are designed with 12, 40, and 55 degree wedge angles, and when used with the specific floor monitoring EQ presets, will ensure that performers hear themselves with ultimate clarity.
Gorilla Speaker Tripod Stands
Here we have the best selling Gorilla GSS-Kit high-quality PA speaker tripod stand package that includes a LIFETIME WARRANTY. This complete PA stand kit comprises of a pair of compact tripod PA speaker stands and a high-quality carry bag and is perfect for mobile DJs, bands and other live performers who take their show on the road.
Unlike much cheaper kits, the GSS-Kit comes equipped with heavy-duty steel speaker stands. With more and more performers using active (powered) speakers, which have onboard amplification and are much heavier than their passive counterparts, it is important to choose speaker stands that can handle the extra weight without buckling or becoming unstable. The speaker stands in the GSS-KIT each have a maximum loading of 50KG which makes them ideal for more heavy-duty applications.
Each speaker stand is fully height-adjustable from 100-160cm meaning they can be tailored to the venue you are playing. These stands are quick and easy to set-up/break-down and fully-integrated toughened plastic fittings mean that there are no loose parts that can easily get forgotten or lost in transit from gig-to gig. A safety locking pin is used in each stand to add additional strength and security to the stand and provide peace-of-mind for the performer.
This pair of stands is supplied with a high-quality carry bag which makes the speakers easier to carry from gig-to-gig and also helps to protect the stands from knocks and scuffs when on-the-road or in storage.