Audio Technica AT-LP140XP Silver
Features
- Experience high-fidelity audio and professional DJ performance
- Direct-drive, high-torque servo motor with speed stabilisation
- Fully manual operation
- Adjustable dynamic anti-skate control
- Selectable 33 / 45 / 78 RPM speeds
- Professional anti-resonance, mass-damped, die-cast aluminium platter with felt mat
- AT-HS6 universal 1/2"-mount headshell and AT-XP3 DJ cartridge with 0.6 mil conical bonded stylus
- Balanced S-shaped tonearm with hydraulically damped lift control, height adjustment, and lockable rest
- Dedicated phono-level output (5.5 mV)
- Stroboscopic platter with speed indicator
- Forward/reverse operation and variable pitch control with quartz speed lock
- Retractable plug-type target light for easier cueing in low light
- Damped base construction for reduced low-frequency feedback coloration
What's in the box?
- Detachable RCA output cable (dual RCA male to dual RCA male)
- Power cable
- 45 RPM adapter
- Counterweight
- Felt mat
- Removable hinged dust cover
This is the Audio Technica AT-LP140XP professional direct-drive DJ turntable with a high-torque motor, a die-cast aluminium platter and an s-shaped tonearm with adjustable height, tracking force and dynamic anti-skate control. This impressive turntable also features the AT-XP3 cartridge; part of Audio Technica's high-quality range of cartridges designed and engineered with their 50 years of experience and expertise.
The AT-LP140XP fully manual professional DJ turntable features a high-torque direct-drive motor and anti-resonant, mass-damped, die-cast aluminium platter to ensure stable, on-axis rotation at 33-1/3, 45, and 78 RPM. It is equipped with an S-shaped tonearm with height adjustment, adjustable tracking force (counterweight) and adjustable dynamic anti-skate control.
Audio-Technica has been a leader in phono cartridge design for more than 50 years, and that expertise shows in the durable, high-output AT-XP3 DJ cartridge with 0.6 mil conical bonded stylus included with the turntable. It comes pre-mounted to an AT-HS6 universal 1/2"-mount headshell.
Designed to connect to components with a dedicated phono input, the turntable comes with a detachable dual RCA output cable and supplies a strong 5.5 mV output.
Additional professional features include a start/stop button; forward and reverse play; selectable high-accuracy quartz-controlled pitch lock and pitch change slider control with +/-8%, +/-16%, and +/-24% adjustment ranges; a stroboscopic platter with speed indicator; a retractable plug-type stylus target light; and a removable hinged dust cover.
- Type: 3-speed, fully manual operation
- Motor: High-torque DC motor
- Drive Method: Direct drive
- Speeds: 33-1/3 RPM, 45 RPM, 78 RPM
- Turntable Platter: Die-cast aluminium
- Starting Torque: >2.2 kgf.cm
- Wow and Flutter: <0.2% (WTD) @ 3 kHz (JIS)
- Signal-to-Noise Ratio: >50 dB
- Output Level: 5.5 mV nominal at 1 kHz, 5 cm/sec
- Power Supply Requirements: 115/230V AC, 60/50 Hz
- Power Consumption: 11W
- Dimensions: 452.0 mm (17.80") W x 352.0 mm (13.86") D x 158.6 mm (6.24") H
- Weight: 10.0 kg (22 lbs.), without dust cover
- Tonearm type: Balanced S-shaped tonearm with detachable headshell
- Effective arm length: 230.5 mm
- Overhang: 16 mm
- Tracking error angle: Less than 3 degrees
- Applicable cartridge weight: 3.5-8.5 g
- Anti-skating range: 0-4 g