Audio Technica AT-XP3 DJ Cartridge
This is the Audio Technica AT-XP3 DJ Cartridge. This excellent quality cartridge has been built with professional DJs and turntablists in mind - Audio Technica are a well-known and highly regarded name in DJing equipment and it shows in the expert design of the AT-XP3 which features a super rigid polyphenylene sulphide body in an attractive blue and black. It has a tracking force of 2 to 4 grams and delivers an output level of 5.5mV making this cartridge the ideal companion to any DJ's turntable set up.
The AT-XP3 cartridge is specially designed for DJs. It features a highly-rigid polyphenylene sulphide (PPS)/glass fibre body, has a tracking force of 2 to 4 grams, and offers a powerful output level of 5.5 mV. Its 0.6 mil conical bonded stylus tracks the centre of the record groove for reliable performance and excellent fidelity. And the cartridge design provides maximum visibility of the stylus tip. The AT-XP3 cartridge is compatible with any XP or VM95 Series replacement stylus, offering a wide choice of options for every budget and application.
- 0.6 mil conical bonded stylus tip
- Highly-rigid polyphenylene sulphide (PPS)/glass fibre body
- 5.5 mV high-level output
- Tracking force of 2.0 to 4.0 grams (3.0 grams standard)
- Durable carbon fibre-reinforced ABS cantilever and nylon wire suspension ensure precise tracking
- Design offers maximum visibility of the stylus tip
- Great tracking and channel separation for high-fidelity sound
- AT-XP3 cartridge is compatible with any XP or VM95 Series replacement stylus, offering a wide choice of options for every
- budget and application
- Frequency Response: 20-18,000 Hz
- Channel Separation: 20 (dB at 1 kHz)
- Vertical Tracking Angle: 20 degrees
- Vertical Tracking Force: 2.0-4.0 g (3.0 g standard)
- Stylus Construction: Bonded round shank
- Recommended Load Impedance: 47,000 ohms
- Coil Impedance: 6.7 k ohms (1 kHz)
- Recommended load capacitance: 100 to 200 pF
- Output: 5.5 mV (1 kHz, 5 cm/sec.)
- Channel Balance: 2.0 dB (1 kHz)
- Stylus Shape: 0.6 mil conical
- Cantilever: Carbon fibre-reinforced ABS
- Mount: Half-inch
- Weight: 6.2 g (0.22 oz)
- Dimensions (H x W x D): 17.2 × 17.8 × 28.3mm | 0.68 x 0.67 x 1.20"
- Replacement Stylus: ATN-XP3
- Accessories Included: Two 11 mm installation screws, two 8 mm installation screws, two washers, two nuts, non-magnetic screwdriver
There are currently no reviews for this product.
Be the first the write a review.