Transmitter Specifications:
- Frequency: 2.4GHz
- Oscillator Type: Gaussian Frequency-Shift Keying (GFSK)
- RF Frequency Band: 2400 to 2483.5 MHz
- RF Output Power: 10 mW
- Signal to Noise Ratio: 70dB
- Voice Delay: 6ms
- Reference Audio Input Level: -30 to -42dBv (Microphone Input, 0 dB Attenuation)
- Audio Gain Control: 11dB, 18dB, 25dB
- Plug-In Power: Yes, 1V
- Distortion: 0.1%
- Digital Resolution: 24-bit / 48kHz
- Frequency Response: 20Hz to 16kHz
- Max Operating Range: 98.4’ (30m) with Obstacles, 164’ (50m) in Open Area
- Max Number of Simultaneous Systems: 18 (up to 36 Microphones)
- Antenna: Built-in 1/4 Wire Antenna
- Buttons: On / Off / Pair, Volume Up, Volume Down
- Battery: Built-in Li-ion 3.7V / 400mAh
- Approx. Battery Life: 5 hours
- Charging Connector: USB Type-C (1.5 hours to be fully charged)
- Input: 1/8'' (3.5mm) Microphone Input
- Indicators: 4 x Blue LEDs: Indicates Power and Audio Level, 1 x Red LED: Indicates Low Battery Level, 1 x Green LED:
- Flashing when Charging / Off when Charge Finished
- Microphone: Built-In Pressure Operated Electret Condenser
- Microphone Pickup Pattern: Omnidirectional (Built-In Microphone and External Lavalier)
- Microphone Frequency Range: 50Hz-18KHz (Built-In Microphone and External Lavalier)
- Microphone Equivalent Noise Level: >58dB (Built-In Microphone and External Lavalier)
- Maximum SPL: 120dB (Built-In Microphone), 110dB (External Lavalier)
- Mounting Clip: Built-In
- Operating Temperature: 0 to 50
- Storage Temperature: -20 to +50
- Dimensions: 2.5 x 1.7 x .65” (63 x 43 x 16.5mm)
- Weight: 1.2 oz (34g)
Receiver Specifications:
- Frequency: 2.4GHz
- Oscillator type: Gaussian Frequency-Shift Keying (GFSK)
- RF Frequency Band: 2400 to 2483.5 MHz
- Signal to Noise Ratio: 70dB
- Voice Delay: 6ms
- Distortion: 0.1%
- Digital Resolution: 24-bit / 48kHz
- Frequency Response: 20Hz to 16kHz
- Max Operating Range: 98.4’ (30m) with Obstacles, 164’ (50m) in Open Area
- Antenna: PIFA antenna
- Buttons: Pair
- Battery: None - draws power from iOS device
- Connector: MFi Certified Lightning Connector
- Indicator: 1 LED, Blue. Flashing quickly: Paring, Flashing: Not Paired with any TX, Solid Blue: Paired with TX
- Operating Temperature: 0 to 50
- Storage Temperature: -20 to +55
- Dimensions: 3 x 0.65 x 0.43” (76 x 16.5 x 11mm)
- Weight: 0.38 oz (11g)
Here we have the ultra-compact wireless 2-person clip-on microphone system with lavaliers and a duel-channel receiver for Android devices. The Blink 500 B6 is a superb light weight kit, perfect for delivering clear professional sound quality.
If you want an extremely small, feather-weight wireless microphone system that delivers broadcast-quality sound to use with Android devices, with the ability to handle two wireless transmitters, nothing is capable of doing this except for the Saramonic Blink 500. This kit comes with a two clip-on wireless transmitters that have built-in mics, two professional lavalier microphones and a USB-C receiver which extremely lightweight, space efficient and works perfectly when used in handheld gimbals. You can put mics on two separate people, and it will work perfectly with the included dual receiver.
Tiny body, huge sound.
The Blink 500 B6 is impossibly compact and lightweight, yet it delivers crystal-clear professional sound quality. The versatile transmitters feature excellent sounding built-in microphones that capture voices perfectly. Small enough to clip to a shirt or slide into a pocket and versatile enough to set on a table or podium, or even used handheld, they also operate as a traditional bodypack transmitter with the included SR-M1 professional omnidirectional clip-on lavalier microphones, providing an even more professional and visually discreet miking solution.
So advanced, it's effortless.
Some wireless microphone systems are complicated to operate and require detailed knowledge of their menus and settings, but the Blink 500 B6 is so technically advanced that it couldn't be easier to use. You just turn it on, and it works. But behind the scenes the Blink 500 is doing a lot to ensure excellent performance. It operates on the interference-free 2.4GHz spectrum, and automatically hops channels to avoid static noise and audio dropouts. Pairing the transmitters with the receiver is simple, and all of the complicated aspects of using wireless microphones happen seamlessly in the background, letting you concentrate on storytelling and getting a great shot.
Perfect levels and power.
One of the tricky aspects of capturing sound for video is controlling the audio levels. Some people speak very loudly, while others speak very softly. That's why Blink 500 transmitters have easy-to-use gain buttons to raise or lower the levels at the touch of a button, and an intelligent LED display shows you where they're set. The transmitters' internal Lithium battery gets 5 hours of life from a charge with the included charging cables, and the USB-C ports can be used to power or recharge the unit in the field with portable USB battery packs. The receiver plugs into the device's USB-C port and draws its power from there. The 10-milliwatt power of the transmitter gives you an impressive range of 98 feet (30 meters) with obstacles, and 164 feet (50 meters) in open spaces.
An ideal wireless system.
Portable, compact wireless microphone systems are completely essential tools for anyone who shoots video, and the fact that the Blink 500 is one of the smallest and most lightweight systems you can get yet it still delivers professional quality sound makes it ideal for journalists, vloggers, YouTube creators, corporate video producers, or any content creator that needs an incredibly easy-to-use wireless system that won't slow them down. It's small enough to tuck away into any briefcase or backpack or even your pocket, so you can effortlessly take it with you everywhere you go. Plus, the Blink 500 series is an evolving system of products that will soon be expanding, giving users even more options and versatility.