Korg Nu:Tekt NTS-1 Synthesiser
- Keyboard Ribbon keyboard
- Sound Generation: 1 Digital Oscillator, 1 Multimode filter, 1 EG, 3 LFO
- Effects: MOD (CHORUS, ENSEMBLE, PHASER, FLANGER), DELAY, REVERB
- Input/output jacks:
- Headphone jack (3.5mm stereo mini phone jack)
- AUDIO IN jack (3.5mm stereo mini-phone jack)
- SYNC IN jack (3.5 mm stereo mini phone jack 20V maximum input level)
- SYNC OUT jack (3.5 mm stereo mini-phone jack, 5V output level)
- MIDI IN connector (3.5 mm stereo mini-phone jack) connector, USB port (micro B type)
- Power supply: USB bus power mode, Current consumption: 500 mA or less
- Dimensions (W x D x H): 129 mm x 78 mm x 39 mm / 5.08" x 3.07" x 1.54"
- Weight: 124 g / 4.37 oz
- Included items: USB cable, Owner's manual, Screwdriver
We bring you the Korg Nu:Tekt NTS-1 Synth; a deceptively small synthesiser with a surprisingly powerful sound. Like other Korg products the Nu:Tekt is a fantastic quality instrument, but unlike other synths on the market it has an extra exciting feature; it's DIY and customisable! Adding a whole new level of creativity and satisfaction to digital music-making you can build this fantastic little synthesiser yourself with the included screwdriver before embarking on your musical masterpiece whether you're at home or on the road.
A wide range of sonic possibilities
Belying its size, the Nu:Tekt NTS-1 features a digital oscillator inspired by the MULTI engine as found on the acclaimed prologue and minilogue xd, along with an extremely capable arpeggiator including multiple ranges, scales, and modes, plus dedicated spatial, modulation, and delay sections, each with multiple settings to explore.
With a single monophonic digital oscillator, one multimode filter, on EG, three LFOs, three stereo effect processors, and full arpeggiator, the NTS-1 is a very powerful, flexible, fun-to-explore synth.
The main oscillator can produce Sawtooth, Triangle, Square and VPM waveforms, and can load custom oscillators created from Korg's logue SDK, which means it's compatible with content created for prologue and minilogue xd. These waveforms can be easily re-shaped and adjusted just by simply turning a couple of knobs.
A wide selection of filters (Low pass 2/4-pole, High pass 2/4-pole, Band pass 2/4-pole and OPEN mode, all with resonance) give you serious control over the overall tone of the oscillator.
The three onboard effects units are inspired by those on KORG's minilogue xd, which itself took onboard effects to a whole new level. Numerous reverbs, modulation effects, and delays are available to blend and edit at will, to really finish out your sound creations.
NTS-1 also offers a fun and practical arpeggiator with several patterns available. Scales and numerous note orders including a Random mode are also available to create new and original ideas on the fly. The pattern length can be adjusted (from 1 to 24 steps) and, when synced externally, the step duration can also be adjusted (16th to 64th notes)
Thanks to its ribbon controller, simple interface and display, the NTS-1 can be played and enjoyed very intuitively. Deeper parameter changes are also possible with several combinations of buttons / knobs, furthering the possibilities. Don't let its size fool you; NTS-1 goes deep but keeps it all easily accessible.
Customize the experience
The fun isn't over after you finish building the NTS-1. The screws on the side panels are long enough to let you easily attach custom side panels.
Get creative and use the NTS-1 in a wide variety of setups. Equipped with AUDIO IN, SYNC IN, SYNC OUT and MIDI IN connectors, the NTS-1 can easily be used in combination with other hardware and software.
You can control it using external MIDI controllers and sequencers, use it to modify and audio signal with its powerful digital effects, or even sync it to other hardware and jam along!
It's also USB micro-B powered so you can plug it directly to a portable battery and take it anywhere with you! You can also connect to your computer's USB port or directly to the power supply using a standard USB power plug.
Free bundle of music software
The NTS-1 comes with a diverse variety of music software from Izotope including "Ozone Elements" which lets you not only create songs but also master them using AI, "Skoove" which will help you improve your keyboard playing skills, "Reason Lite" DAW software, as well as software synths from KORG and other brands.
In other words, the moment you get your hands on this synthesizer you'll have a variety of tools to help you take your music to the next level.
Excellent little unit with great built in effects. Easy to put together using the video (link in the instructions included ) and if I can do it anyone can. Speaker is functional at best but linked to headphones or mixer sounds fine. Great little Arpeggiator! Ordered from Get in the Mix and delivered in 48 hrs...compare that with Amazon and Gear4Music who both advertised in stock but then delayed and delayed so I had to cancel ...will be coming back. Thanks
A great little synth, quick and easy to put together. Some people might find it a tiny bit tedious, where as others will get a little bit of extra excitement constructing it yourself. Easy to use and plenty of ins and outs, I was able to power it up using a usb phone charger. The synth itself it's great with quite a few editing abilities, and the fx sections are awesome, and with an audio in socket means you can use the fx on external sources. 10/10