Laserworld CS-1000RGB MKIII Laser System
CS-1000RGB MKIII Features:
- 1 W RGB laser system
- DMX controllable, master-slave operation possible
- Diode-only laser system
- Computer controllable via ILDA
- Sound-to-light and stand-alone mode
- Front panel laser beam masking plate
- Capable of basic graphics, texts and logos
- Several hundred colors, including white
- 28 kpps@8° scanners
- 360° mounting bracket
CS-1000RGB MKIII Specifications:
- Total Power: 1'000 mW
- Guaranteed Power: 800 mW
- Power Red: 200 mW / 650 nm
- Power Green: 100 mW / 520 nm
- Power Blue: 540 mW / 445 nm
- Beam Specifications: ca. 3 mm / 1.1 mrad
- Scanner: 28 kpps@8°
- Max. Scan Angle: 40°
- Laser Source: Diode
- Laser Class: 4
- Operation Modes:stand-alone, sound-to-light, DMX, ILDA, master-slave
- Basic Patterns: ca. 200 (layers, tunnels, fences, waves, etc.)
- Accessories: power cable, manual, interlock, key
- Power Supply: 85V - 250 V AC
- Power Consumption: 60 W
- Dimensions: 220 x 155 x 145 mm
- Weight: 3,15 kg
Here we have the brilliant Laserworld CS-1000RGB MKIII, a semi-professional laser system that can be controlled via sound-to-light, stand-alone mode as well as DMX control so it can flow with the rest of your lighting setup for that amazing light show you've looking for. Produce beams, waves, tunnels and basic graphics to wow your crowd, the perfect addition for any nightclub instalments, indoor events and mobile DJs!
The Laserworld CS-1000RGB show laser projector comes with a completely new designed compact housing, which is light weight and has a stable bracket. The bracket allows for different mounting positions: a hanging as well as a standing installation is possible - ideal for mobile DJs and temporary laser shows, but also for fixed installations at a truss or at the ceiling.
The Laserworld CS-1000RGB is a multi colour RGB laser system with a total output power of up to 1'000 mW and a guaranteed output power of 800 mW. The red laser source has an output power of 200 mW / 650 nm, the green 100 mW / 520 nm and the royal-blue laser source has an output power of 540 mW / 445 nm. The laser sources ensure brilliant colours and powerful laser beams. The projector has good beam specifications with ca. 3 mm / 1.1 mrad. The galvo system has a scan speed of up to 28 kpps@8°.
Pattern size can be set by two rotary buttons on the rear side of the housing. The sensitivity of the microphone can be adjusted via the integrated display.
Through DMX, in the automatic mode as well as in the sound-to-light mode about ca. 200 (layers, tunnels, fences, waves, etc.) can be projected in different colours and in various speed. If the automatic mode is active, the pre-programmed patterns run without assistance and in the sound-to-light mode, the laser system projects according to the sound.
Next to the modes mentioned above, this laser projector provides a master-slave-mode. Show lasers of the same series (slave projectors), connected via DMX to a main projector (master projector) project the same patterns like the master projector.
The Laserworld CS-1000RGB is computer controllable through a professional ILDA interface. Thus custom or pre-programmed lasershows, logos, texts or own graphics and animations can be shown in combination with a laser control software.
There are safety features like a key switch, an interlock connector and an on-off switch.
The Laserworld CS-1000RGB is ideal for semi-professional applications and is perfectly suitable in bars, medium sized clubs and discos as well as for mobile DJs, private use and in any other party location.