Prolight Rhino Quick Clamp
The quick way to hang your lights. Simply attach the spigot to your light and the clamp stays permanently attached to your T-bar. Just push the spigot inside the clamp, wait for it to click then turn the knob and your done.
- Universal lighting clamp
- For use with any square T-bar
- Supplied in single units
- Max load 10kg
Saves me a lot of time now fumbling around with bolts and wing-nuts trying to put up a few small extra lights. Just push up and it's done. Setup and tear down for me is now at least 10 minutes faster. If you have the Equinox Booth Overhead Lighting Kit, you will need to modify it to use these by enlarging the holes an extra 2mm. This can be done with a simple electric drill and a 10mm HSS drill bit. You could probably use a hand drill, but you'll be there for a while drilling through the aluminium...