Ableton Live 10 Standard
If you've just bought a new production controller or are looking for some new DAW studio software then Abelton Live 10 Standard will be the software you're looking for. It is bundled with several MIDI and audio effects which are listed and described below, allowing you to add a multitude of effects onto your music. Ableton Live 10 is compatible with a wide range of MIDI and production controllers so check out the list now and see if yours is on there!
As an owner of this product you'll also have access to the new Ableton 10 upgrade; Ableton 10.1 which you can get via the Ableton website: www.ableton.com It includes tonnes of new features such as user wavetables, two new devices, improvements to zooming and scrolling, plus more.
These are available to buy with Ableton Live 10 upgrade options from previous versions on the drop down list. The EDU version is for students only, you will need to prove your student status to use this version.
Please note: For the download only versions when we receive your order we will email you your serial number and download instructions, typically within 1-2 hours (during our business hours) and no more than 48 hours after the order is placed. Please be aware that no returns are accepted for any digital software downloads.
Please check that your hardware is compatible before purchasing this software.
Drum Buss is a one-stop workstation for drums, capable of adding subtle character or bending and breaking drums to your will. Add warmth and distortion with drive and crunch, take control of dynamics with compression and transient shaping, dial in and tune boom and control bass decay with the dedicated low end section.
Turn your most spontaneous ideas into music, without thinking about recording. Starting a song? Just arm a MIDI track and play. When an idea emerges, press Capture after you played it. Live will match your tempo and timing, and start your melody or groove in a perfect loop. You can also use Capture to progress your songs: add new parts or overdub MIDI into existing clips without breaking your flowjust press Capture after youve played it right.
Edit Multiple MIDI Clips
Create drums and bass, or chords and melody in tandem. Work with multiple MIDI clips across multiple tracks within a single viewin both Session and Arrangement. Now you can edit smarter and take better control of the musical relationships in your song.
Create and Arrange More Fluidly
The Arrangement View has been optimized for quick creative editing and more efficient song creation. Easily stretch a clip, slide its content or create audio fades with new clip interactions that work directly in the Arrangement. Automate with greater control using grid snapping and other improved breakpoint interactions. Focus instantly on what you need to with quick keyboard shortcuts: toggle automation visibility for all tracks, zoom in and out of selections of your song, nudge clips, and even make audio edits like reversing samples.
New Library of Sound
With new collections of Packs, Live 10 has more sounds that are ready for finished music, right out of the box. Theyre set up for tweaking to your needs or taking in different directions. Plus the library has been reorganized to make it easier to find what youre looking for.
A new range of sound packs captures the musical threads that tie together evolving styles and scenes. Each Pack is a curated selection of instruments, clips and samples that share a common sonic theme. Theyre ready to create with as they are, and are also set up with Macros or shaping into something completely new.
Skitter and Step inhabits the space where growling basses, rinsing pads and jarring melodies collide with jagged, broken percussion. The cavernous spaces, dubby basses and tight drums are ready for production but were designed for deep sound manipulation.
Abletons homage to the style that made sampling an art form and put a new kind of groove on the musical map. Chop and Swing comes loaded with curated recordings and professional presets perfect for cutting up and re-combining into fresh new tracks.
Drum Essentials - New in Live 10 - Drum Essentials is a collection of handpicked sounds selected to cover a wide range of styles. A flexible, highly refined Pack to form the rhythmic foundation of any production.
Grand Piano - The powerful expressiveness of a renowned concert grand in Live. Multiple articulations, sampled from a carefully prepared and programmed piano to capture the virtuosity of the classical grand piano sound.
Guitars and Bass - A set of electric guitars and basses, expertly multisampled to cover different playing styles, velocities and articulations - from funky slap bass to gently strummed guitar chords.
Skitter and Step - New in Live 10 - A sound collection that inhabits the space where growling basses, rinsing pads and jarring melodies collide with jagged, broken percussion. The cavernous spaces, dubby basses and tight drums are ready for production but were designed for deep sound manipulation.
Vinyl Classics - Over 400 loops and samples from Zero-G in a wide range of styles, including smooth '70s grooves, gritty hip hop and edgy, abstract weirdness.
Chop and Swing - New in Live 10 - A homage to the style that made sampling an art form and put a new kind of groove on the musical map. Chop and Swing comes loaded with curated recordings and professional presets perfect for cutting up and re-combining into fresh new tracks.
Loopmasters Mixtape - A set of samples and loops from Loopmasters, from synthesized sound design to acoustic drums and founds sounds. Features content from Partners such as Puremagnetik and Soniccouture, and Loopmasters' artist Pack sounds from artists such as Digable Planets, Coldcut, Todd Terry, and more.
External Instrument - A tool for integrating your external hardware synthesizers into your Live Sets with the ease and flexibility of plug-ins.
Drum Rack - An instrument for layering samples, synths and effects in a classic 16-pad grid.
Impulse - A drum sampler with complex modulation capabilities.
Simpler - An easy-to-use but powerful sampler with classic synthesis parameters.
Instrument Rack - Combine multiple instruments and effects into a single device, allowing for split and layered sounds with customized Macro controls.
Dynamic Tube - Tube saturation for added harmonics and warmth.
Drum Buss - New in Live 10 - A one-stop workstation for drums, capable of adding warmth, distortion, drive, compression, transient shaping, plus a dedicated low end section.
EQ Eight - Eight parametric filters with a variety of controls for shaping timbre.
External Audio Effect - A tool for integrating your external hardware effects into your Live Sets with the ease and flexibility of plug-ins.
Filter Delay - Three delay lines with independent filtering, feedback, stereo position, and more.
Frequency Shifter - Classic frequency shifting and ring modulation, for effects ranging from subtle phasing to dissonant, metallic sounds.
Glue Compressor - Analog-modeled compressor based on the classic bus compressor from a famous 80s mixing console.
Multibrand Dynamics - Upward and downward compression and expansion of up to three frequency bands.
Overdrive - Distortion effect based on classic guitar pedals.
Resonators - Five parallel, tunable resonators that apply a tonal character to incoming audio.
Spectrum - Realtime analysis and visualization of incoming audio.
Vinyl Distortion - Emulates the noise and distortion of vinyl records.
Vocoder - Classic talking synthesizer and robotic voice effects.
Auto Filter - Classic analog filter emulation with an envelope follower and LFO.
Auto Pan - LFO-driven panning, tremolo and beat-synchronized chopping effects.
Beat Repeat - Creative beat mangling with controlled or randomized repetitions of an incoming signal.
Chorus - Create thickening or flanging effects with two parallel modulated delays.
Compressor - Dynamics processing to add punch and loudness.
EQ Three - Three-band EQ with kill switches, modeled on classic DJ mixers.
Erosion - Adds digital-sounding artifacts and noise to audio signals.
Flanger - Classic tape phasing sound caused by time-modulated delays.
Gate - Dynamics processing for noise reduction and decay or reverb shaping.
Grain Delay - Granular delay with controlled or randomized pitch.
Limiter - Sets an absolute output limit, suitable for mastering.
Looper - Records, loops and overdubs audio, based on classic hardware looping pedals.
Phaser - Sweeping effects created by notches in the frequency spectrum.
Ping Pong Delay - Filtered delay that jumps between the left and right outputs.
Redux - Bit- and sample-rate reduction for classic lo-fi sounds.
Reverb - Simulates the acoustics of real or imaginary rooms.
Saturator - Waveshaping distortion for adding dirt, punch and warmth.
Simple Delay - Two independent delay lines with feedback and tempo sync.
Tuner - Tuner shows the incoming pitch and its distance from the nearest semitone, helping you quickly get instruments in tune.
Utility - Updated for Live 10 - Multipurpose tool for adjusting gain, phase, stereo width and more.
Audio Effect Rack - Combine audio effects into a single device, allowing for the creation of simplified Macro controls for complex effects chains.
Arpeggiator - Takes individual notes from a held chord and plays them as a rhythmical pattern.
Chord - Adds up to six additional pitches to incoming MIDI notes to create chords.
Note Length - Alters the length of incoming MIDI notes or triggers notes via Note Off.
Pitch - Transposes MIDI notes by a specified amount.
Random - Applies chance-based random transposition to MIDI notes.
Scale - Remaps incoming MIDI notes to different outgoing MIDI notes.
Velocity - Randomizes or compresses MIDI note velocity.
MIDI Effect Rack - Combine MIDI effects into a single device, allowing for customized MIDI processing chains with simple Macro controls.
- Software Instruments: 5
- Sounds: 1800+ (10+ GB)
- Audio Effects: 34
- MIDI Effects: 8
- Unique Session View for quick, intuitive composition, flexible performance and improvisation
- Nondestructive editing with unlimited undo
- Multitrack recording up to 32-bit/192 kHz
- Powerful MIDI sequencing of software and hardware instruments
- Advanced warping and real-time time-stretching
- Unlimited Instruments, Audio effects and MIDI effects per project
- Group tracks - Updated for Live 10 - Use multiple levels of groups to mix with greater flexibility and manage detailed arrangements more easily.
- VST and Audio Unit support
- Time signature changes
- Multiple automation lanes
- Track Freeze
- Capture - New in Live 10 - Recall your best ideas after you've played them – Capture can turn what you played into MIDI clips, without having to think about recording.
- Automatic plug-in delay compensation
- MIDI remote control instant mapping
- MIDI output to hardware synths
- MIDI Clock/sync
- Multicore/multiprocessor support
- WAV, AIFF, MP3, Ogg Vorbis, FLAC file support
- Ableton Link - A technology that keeps instances of Live and a growing collection of iOS apps in time over a wireless network.
- Drum Rack - An instrument for layering samples, synths and effects in a classic 16-pad grid.
- Audio & MIDI tracks - Unlimited
- Scenes - Unlimited
- Send and return tracks - 12
- Audio inputs (Mono audio input channels) - 256
- Audio outputs (Mono audio output channels) - 256
- Complex Warp Modes - Advanced algorithms for stretching audio, ideal for working with mixed audio or full tracks.
- Audio-slicing - Slice audio to a Drum Rack or Sampler instance.
- Audio to MIDI - Extract harmony, melody or drums from an audio sample and convert it to MIDI.
- REX File Support - Support for ReCycle/Reason audio files.
- POW-r dithering - Mastering quality dithering modes for downsampling audio.
- Video import/export - Import video as a clip and save modified video and audio.
- Groove Pool and Extract Groove - A set of templates for timing and “feel” of sequences – or make your own by extracting timing from existing audio material.
- Push - Push is designed to help you make songs from scratch. With Push you get all of the fundamental elements of music making — melody and harmony, beats, sounds, and song structure — at your fingertips. Because it’s powered by Live you still get all the advantages of software when it comes to editing, mixing, mastering, and exporting your finished track.
Ableton Live Controllers:
Compatible MIDI Controller with Auto-mapping
- Advance 25
- Advance 49
- APC 20
- APC 40
- APC Key 25
- APC mini
- MIDI Mix
- MPD 18
- MPD 24
- MPD 32
- MPK 25
- MPK 49
- MPK 61
- MPK 88
- MPK 225
- MPK 249
- MPK 261
- MPK mini
- Master Control
- Photon 25, Photon X 25
- V series
- VI series
- VX series
- BCF 2000
- BCR 2000
- UC 33e
- LV1, LX1
- LV2, LX2, LC2, LD2
- Kontrol 49
- Zero 8
- Control, Control XT
- Axiom, Axiom Pro and Axiom AIR series
- Keystation Pro 88
- MidAir 25
- Oxygen 8 V1 and V2
- Oxygen 3rd and 4th generation series
- ProjectMix IO
- Trigger Finger
- Ozonic, Ozone
- Radium 49
- Radium 61
- Launch Control
- Launch Control XL
- Launchkey Mini
- Launchpad Mini
- Remote SL and SL Mk II series
- Remote SL Compact series
- Remote Zero SL
- A-PRO series
In addition to all the above controllers, Live supports any standard MIDI controller for sending and receiving MIDI notes and controller information.
Live 10 Minimum System Requirements
- Windows 7, Windows 8 or Windows 10
- 64-bit Intel® or AMD multi-core processor. Intel® Core™ i5 processor or faster recommended.
- 4 GB RAM (8 GB or more recommended)
- OS X 10.11.6 or later
- Intel® Core™2 Duo processor. Intel® Core™ i5 processor or faster recommended.
- 4 GB RAM (8 GB or more recommended)
Please Note: Live 10 is 64-bit only
Live is not supported on Linux
There are currently no reviews for this product.
Be the first the write a review.