TS215W Speaker Features:
- 550W continuous, 1100W peak Class D power
- 15-inch (381 mm) LF driver, 2.5-inch (63.5 mm) high-temperature voice coil
- 1-inch (25.4 mm) neodymium HF driver with precision waveguide
- Bi-amplified design with precision active crossover and EQ
- Integrated 2-channel mixer with dual XLR 1/4-inch combo mic/line inputs and independent level controls
- Bluetooth-equipped-wirelessly stream backing tracks or background music from any Bluetooth-compatible device
- Bluetooth Link-Stream a stereo signal to separate speakers-no cables required
- Custom engineered high-efficiency class D amplifiers with passive cooling design - No fan means the speaker runs cleaner, quieter and has greater long-term reliability
- Ground-Lift switch
- Contour switch for increased EQ control
- Electronic clip, thermal and transducer overdrive protection
- Compact, lightweight, trapezoidal cabinet design for easy transport and installation
- Angled rear panel for wedge monitor applications
- Stand and pole-mountable with integral M10 suspension points
- XLR Link output
- Designed and tuned in the USA
TS215W Speaker Specifications:
- Output Power - 1100W peak (700 LF + 400 HF) / 550W continuous (350 LF + 200 HF)
- Low Frequency - 15-inch (382 mm) woofer, 2-inch (51 mm) voice coil
- High Frequency - 1-inch (25 mm) neodymium driver with precision waveguide
- Crossover - 2kHz
- Maximum SPL - 129 dB peak, 126 dB continuous (dB-SPL @ 1 m)
- Frequency Response - 50 - 20 kHz (+/- 3 dB)
- Frequency Range - 43 Hz - 22 kHz (-10 dB)
- Coverage: 90° H x 60° V nominal
- Bluetooth Range - Up to 60 feet, line-of-sight
- Connectors - (2) XLR + ¼-inch combo jack mic/line inputs, (1) XLR Mix output
- Cabinet - Trapezoidal, injection-molded, polypropylene enclosure with perforated steel grille
- Controls - Volume, power on/off with LED, clip limiter with LED, ground lift, Bluetooth: pair, link, pair/link tone volume
- Protection - Electronic clip, thermal and transducer overdrive protection
- Power - AC Input: 100-120/220-240 V, 50/60 Hz, Fuse: 100-120 V T6.3AL AC250V/220-240 V T3.15AL AC250V
- TS215W Dimensions (WxDxH): 15.6" x 14.1" x 25.7" inches / 396 x 357 x 652 mm
- TS215W Weight: 32.7 lbs. / 14.9 kg
Gorilla GSS-Kit Specifications:
- Height: 100cm - 160cm
- Load Capacity: 50Kgs
- Material: Steel
- Finish: Black powder-coating
- Kit includes: 2 x stands, 1 x bag
This fantastic wireless PA speaker package includes:
2 x Alto TS215W Wireless Speakers
1 x Speaker Tripod Stands with Bag (Pair)
2 x 6m Male XLR to Female XLR Cables
Alto TS215W Speakers
The Alto TS215W is a 1100W peak power PA speaker which features a 15" low frequency driver along with a 1" high frequency driver. The TS215W makes your mobile PA system even more portable by integrating wireless technology into Altos' popular TS2 series PA cabinets. This fantastic speaker is stand/pole-mountable with an angled rear enclosure for optional floor monitor use. This versatile loudspeaker is ideal for mobile entertainers and touring musicians, it can also be installed as a permanent fixture with integrated M10 suspension points for ceiling rigging/suspension.
Because of their cutting-edge, high-efficiency amplifiers, these speakers run at far lower temperatures than conventional amplifiers, even during extended periods of high output. The ground-up design incorporates advanced amplifiers with superior heat-dissipation characteristics, eliminating the need for costly, noisy cooling fans. The result is a powered speaker system that is cleaner, quieter and more reliable.
Higher performance, unsurpassed utility and flexible I/O options, easy transportability and unparalleled value, all combined with the unsurpassed versatility of wireless Bluetooth streaming capability-it's all here in the Alto Professional TS2W Series.
Gorilla Speaker Stands Kit
This complete PA stand kit comprises of a pair of compact tripod PA speaker stands and a high-quality carry bag and is perfect for mobile DJs, bands and other live performers who take their show on the road. Each speaker stand is fully height-adjustable from 100-160cm meaning they can be tailored to the venue you are playing. These stands are quick and easy to setup/break-down and fully-integrated toughened plastic fittings mean that there are no loose parts that can easily get forgotten or lost in transit from gig-to gig. A safety locking pin is used in each stand to add additional strength and security to the stand and provide peace-of-mind to for the performer.