FBT J12A PA Speaker
The FBT J12A is a superb sounding 12" PA speaker with high efficiency class-D amplifiers. The J12A can be used as a stage monitor, satellite speaker in combination with subwoofer(s), a permananent fixture in a club, or as a full-range system on pole mounts.
The FBT J12A series speakers feature lightweight, yet rugged gas injected molded polypropylene cabinet construction. Available in black finish the FBT J12A series speakers modern cabinet appearance provides fixed installations with an elegant design that blends into any decor. The asymmetrical shape of the J12A cabinet also allows use as a powered floor stage monitor.
The J12A is of two way design incorporating a 12" low frequency woofer and 2" HF custom compression driver coupled to a 90°H x 60°V horn. The active internal crossover is at a fixed frequency of 2kHz. With a frequency range of 50Hz - 20kHz the J12A speakers provide high fidelity sound for both speech and music applications with a maximum SPL of 128dB. A front face steel grille protects the speaker from external damage.
The bi-amplified J12A active speaker feature a 250W RMS low frequency amp and a 50W RMS high frequency amp. The control panel features a level control, HP filter switch, mic/line selector, preset switch (original, floor/vocal, boost/lounge, club/dj) led power on, protection/limiter led indicators, a balanced XLR and Jack in, a balanced XLR link out. The two M10 fly points built into the cabinet along with the optional mounting brackets allow the J12A speaker to be surface mounted on walls or ceilings. A standard 35mm speaker stand socket allows the J12A to be mounted on a speaker stand.
- 320mm (12") custom woofer with improved efficiency and linearity
- 350W rms class D amplifier for LF and 100Wrms for HF.
- High efficiency switch mode power supply
- On-board Digital Signal processing with dynamic equalizations and protections for high SPL and high reliability.
- 4 DSP preset for maximum acoustical flexibility
- 2-way bi-amplified system in Bass-Reflex
- Polypropylene enclosure with integrated handle
- 2 x M10 anchoring points
- 25mm (1") HF custom AF compression driver
- 90°H x 60°V constant directivity horn
- Configuration: 2 way
- Built-in amplifier LF/HF: 350/50 W RMS
- Built-in amplifier peak LF/HF: 700/200 W
- Frequency response: 50Hz - 20KHz -6dB
- Low Frequency woofer: 12 - 2 coil inch
- High Frequency driver: 1 -1 coil inch
- Maximum SPL cont/peak: 124/128 dB
- Dispersion: 90° x 60° HxV
- Input impedance: 22 Kohm
- Crossover Frequency: 2 KHz
- AC Power requirements: 400 VA
- Input connector: XLR - jack with loop
- Power cord: 5 / 16.4 m/ft
- FBT J12A Dimensions (WxHxD): 410x663x387 - 16.14x26.10x15.23 mm/inch
- FBT J12A Weight: 13.7 / 30.2 Kg/lb
There are currently no reviews for this product.
Be the first the write a review.