Audio Technica AT-XP5/HC
AT-XP5 mounted on AT-HS6BK Headshell
Send to a friend
Product Description
We bring you the Audio Technica AT-XP5/HC featuring the AT-XP5 cartridge pre-mounted onto the AT-HS6BK headshell. Audio Technica have a long and rich history in DJ equipment production and this classic combination continues their trend thanks to the impressive accuracy of the AT-XP5 and the solid reliability of the AT-HS6BK.
The AT-XP5/H combo kit includes the AT-XP5 DJ cartridge premounted on the AT-HS6BK headshell.
Features:
- 0.3 x 0.7 mil elliptical bonded stylus tip
- Highly rigid, lightweight polyphenylene sulphide (PPS)/glass fibre body
- 5.5 mV high-level output
- Tracking force of 2.0 to 4.0 grams (3.0 grams standard)
- Durable carbon fibre-reinforced ABS cantilever and nylon wire suspension ensure precise tracking
- Design offers maximum visibility of the stylus tip
- Great tracking and channel separation for high-fidelity sound
- Universal 1/2"-mount headshell for 4-pin turntable cartridges
Specifications:
- Frequency Response: 20-18,000 Hz
- Channel Separation: 20 (dB at 1 kHz)
- Vertical Tracking Angle: 20 degrees
- Vertical Tracking Force: 2.0-4.0 g (3.0 g standard)
- Stylus Construction: Bonded round shank
- Recommended Load Impedance: 47,000 ohms
- Coil Impedance: 6.7 k ohms (1 kHz)
- DC Resistance: 990 ohms
- Coil Inductance: 1.0 H (1 kHz)
- Recommended load capacitance: 100 to 200 pF
- Output: 5.5 mV (1 kHz, 5 cm/sec.)
- Channel Balance: 2.0 dB (1 kHz)
- Stylus Shape: 0.3 x 0.7 mm elliptical
- Cantilever: Carbon fibre-reinforced ABS
- Mount: Half-inch
- Weight: cartridge 6.2 g (0.22 oz); cartridge and headshell 15.6 g (0.55 oz)
- Dimensions (H x W x D): cartridge 17.2 × 17.8 × 28.3mm | 0.68 x 0.67 x 1.20"; cartridge and headshell 21.2 × 21.4 × 62.4mm | 0.83 x 0.84 x 2.46"
- Replacement Stylus: ATN-XP5
- Accessories Included: Two 11 mm installation screws, two 8 mm installation screws, two washers, two nuts, non-magnetic screwdriver
Facebook Comments
You may also like...
