Gorilla GTS-02 Lighting 3M Truss Stand
Introducing the GTS-02 from Gorilla Stands. This 3m goalpost/truss lighting stand system is perfect for large mobile applications where a large lightshow is being used and strong, reliable support is required. The 3 meter flat truss section is supported at either end by a pair of high-quality tripod stands each with its own T-bar section for attaching further lighting fixtures. Combined, the truss lighting bridge and T-bars offer a total maximum load of 120kg which is enough to support a substantial amount of lighting effects. Height adjustable upto an amazing 4m, the GTS-02 is perfect for larger venues where you want a long-throw from your lighting effects.
Thanks to its' rigid steel construction, the GTS-02 remains stable even when fully loaded and doesn't sag under the weight like other, lower quality stands. The black-powder coated finish not only looks smart but helps keep the stand looking good by helping to protect it from everyday marks and scuffs. Despite its' size, the GTS-02, 3m trussing system is quick and easy to setup with only mimimal fixings required. Invest in quality support for your lightshow with the GTS-02 from Gorilla Stands.
Here we have the Gorilla GTS-02 Brand New and complete with a 1 year warranty as standard. Buy the GTS-02 3m truss lighting goalpost stand with confidence from the UK's largest official Gorilla Stands dealer with 100% satisfaction guaranteed or your money back! Getinthemix.com
We are so confident that you will be happy with your purchase, that we also offer a 30 day money back guarantee on all of our products!
- 3m Flat truss section
- Strong tripod support
- 2 Additional t-bars
- Tough steel construction
- Assemble in minutes
- Exceptional quality and value
- Max Height: 400cm
- Max Load: 120kg
The Gorilla GTS-02 Lighting 3M Truss Stand is an excellent stand that is very configurable which makes it great value for money. With the T-bar pieces you can use the stands on their own without the truss. The two truss pieces have flat ends where they meet in the middle, these bolt together. For added strength they lock together with smaller tubes that fit inside the truss tubes and then bolts drop though to secure both ends. This means that you can also use it with just one truss piece. With the small tubes in place you can fit the plastic end caps that join the truss to the stands to make a 1.5m truss span. The 4m max height is achieved by adding extension poles that are about 1.5m onto the top of the stand poles. These are secured in a similar way to joining the truss. Smaller tubes are inserted into the stand and extension poles and bolted into place but with the addition of a plastic collar over the join. This allows many combinations of T-bar and truss height. You could have the truss as it is in the picture and add the extension poles to raise the T-bars higher above the truss. The plastic collars are secured with Allen bolts and an Allen key is included along with a bag of bolts and wing nuts, enough for the joins and extras for bolting your lights to the poles. The T-Bars are poles and not flat as some other T-bars are. This means you can hang lights with G clamps but they also have holes drilled so you can use bolts, but you will need longer bolts than with a flat bar. I guess that is why they include some for you. Once set up the truss stand is very stable. I havenít used it at full height but set up as in the example picture you could push on it and it didnít want to tip over. I am very pleased with my purchase. One thing to note is that it is very long when packed down, obviously the 3m truss becomes 1.5m when separated and most of the other parts are a similar length or shorter. But 1.5m might be longer than you think and not fit in your boot, unless you have a van. I thought it would fit in the boot of my people carrier no problem as its massive, but when I measured I realised I would still need to fold a seat down.