1000 mA Regulated Switch Mode PSU
600 mA Regulated Switched Mode Plug-in Power Supply with 6 Output Voltages and 6 DC Interchangeable Plugs. Plug-in regulated power supply with 3-12 V DC switchable output. LED indicator and selectable polarity. Comes complete with 6 DC adaptor plugs. Features include, IC regulated DC output, short circuit protection and automatic overload cut off.
Instructions for use:
Please read the following instructions step-by-step before using the adaptor.
VOLTAGE: Set voltage selector switch in accordance with the voltage requirement of your electronic unit.
MILLIAMP (mA): Verify the mA requirement of the unit and determine if it can be used with a 100mA power supply.
POLARITY: Determine the polarity (+ or -) of the unit and set the polarity according to the polarity of the electronic unit. The polarity can be found on the unit or in the user manual.
NOTE: The positive setting (Negative ground) is the most common requirement.
OUTPUT PLUG: Select a proper output plug and plug it into the jack on the electrical appliance.
PLUG IN: Attached the adaptor into a 100-240VAC mains socket. The LED lights indicating that the unit is on.
IMPORTANT: If unit does not operate properly, check the polarity setting IMMEDIATELY.
Remove the unit when not in use.
1000 mA Regulated Switch Mode PSU Features:
- Colour: Black
- Dimensions (mm): 67x50x60
- Weight (kg): 0.3
- Power Input: 230 V AC @ 50 Hz
- Plug Type: UK
- Packing: Retail Box
- Connectors: 6 Interchangable DC adaptor plugs
- Outputs: 3, 4.5, 5, 6, 7.5, 9, 12 V DC
1000 mA Regulated Switch Mode PSU Specifications:
- Input: 100-240V AC 60/50Hz 0.16A
- Output: 3.0/4.5/5.0/6.0/7.5/9.0/12V DC 1000mA