Shure MV7+ Podcast Microphone (White)
Legendary broadcast-quality sound in a convenient USB microphone format
Dynamic microphone capsule with USB-C and XLR outputs
Physical and digital pop filters with built-in reverb options
3.5 mm headphone jack with direct monitoring
Advanced DSP with auto-level and noise reduction
Cardioid polar pattern to reduce unwanted room noise
Customisable colour LED touch panel
High-resolution 48 kHz / 24-bit audio recording
Compatible with macOS, Windows, iOS and Android
Includes USB cable and integrated mounting system
The Shure MV7+ Podcast Microphone, shown here in white, makes achieving a professional podcast sound easier than ever. Building on the success of the original MV7, the MV7+ is a broadcast-style dynamic microphone designed to deliver clear, focused vocals for podcasting, streaming, and content creation.
It features both a traditional XLR output and a USB connection, giving you the flexibility to record through audio interfaces, mixers, and hardware recorders, or connect directly to computers and mobile devices.
The updated MV7+ introduces several enhancements to elevate the recording experience. These include a customisable full-colour LED touch panel with built-in metering, upgraded DSP processing for improved sound quality and reduced background noise, and three selectable reverb modes for added depth.
Additional improvements include a USB-C connection and seamless integration with Shure’s MOTIV Mix software, allowing you to fine-tune a wide range of microphone and audio settings for complete control over your sound.
Key Specifications
Microphone Type: Broadcast / Podcast
Polar Pattern: Cardioid
Element Type: Dynamic
Frequency Response: 50 Hz – 20 kHz
Maximum SPL: 128 dB
Analog Output: 1 × XLR 3-Pin Male
Digital Output: 1 × USB-C Female
Power Source: USB Power
Microphone
Microphone Type: Broadcast / Podcast
Polar Pattern: Cardioid
Element Type: Dynamic
Sound Field: Mono
Orientation: End Address
Controls: Mic Mute
Pad: No
Performance
Frequency Response: 50 Hz – 20 kHz
Maximum SPL: 128 dB
Connectivity
Analog Output Connector: 1 × XLR 3-Pin Male
USB/Digital Output: 1 × USB-C Female
USB Class-Compliant: Yes
Cable Length: 9.8 ft / 3 m
Wireless: No
Digital Audio
A/D Conversion: 24-bit
Sample Rate: 48 kHz
Digital Signal Processing & Effects: Noise Cancellation, Limiter, Sound Preset, Gain, Monitor Mix, LED Mode, Low Cut / High-Pass Filter, Compressor, Mute Lock (via software)
Compatibility
Operating Systems: Windows 10 or later, macOS 12 or later
Mobile App Support: Android and iOS
Power
Power Source: USB Power
Physical
Colour: White
Mounting Thread Size: 5/8"-27 Female (3/8"-16 Female with included adapter)
Environmental Resistance: No
Dimensions (Microphone): Ø 2.6 × L 2.1 in / Ø 66.5 × L 53.6 mm
Dimensions (With Mount): H 6.5 × W 3.5 × L 8.1 in / H 164 × W 90 × L 207 mm
Weight: 573.5 g




