sE Electronics 2200A II C (MP)
The sE Electronics 2200A II C (MP) is the multi pattern version of the mark II 2200A II microphone. The original grammy-singer-recording cardioid mic 2200A has been given a facelift and a feature update to improve this already fantastic microphone.
With the same hand-built brass capsule as the original, the Mark II version of this modern classic adds a multi-pattern version, a clever quick-release shockmount with integrated pop filter, and rubberized black paint to dampen any chassis resonances.
At the heart of the 2200a II is the hand-built, hand-tuned brass capsule that put sE on the map as a serious microphone manufacturer. With a gold-sputtered center-terminated diaphragm (two of these back-to-back on the multi-pattern version), the 2200a II's capsule is built in the same style as the vintage European capsules that have been used and loved for many decades.
Manufactured, assembled, and individually tested in-house by our team of skilled capsule technicians, these capsules are the soul of the 2200a II.
If all you need is a cardioid polar pattern - most vocals will only require this - the 2200a II C is a great choice. But if you want to experiment with different amounts of room sound, various instruments, or multiple sound sources, the multiple pattern controls of the 2200a II are a valuable asset. In addition to the standard -10dB setting, the multi pattern 2200a II includes a -20dB setting for additional low-frequency control.
Part of the 2200a II's update can be seen in the clever new quick-release Isolation Pack shockmount. With the twist of a single knob, the mount attaches quickly and securely to the microphone, and is removable with the same simple motion. This allows the mic to be set up quickly and easily - no adjustments, no hassle.
As with many of sE's newest models, the 2200a II chassis is finished in a custom black rubberized paint, which helps dampen any chassis resonance as well as keep the mic unobtrusive to an audience or camera, even under bright stage lights.
- Frequency Response: 20Hz-20kHz
- Sensitivity @1kHz into 1 K Ohm: 20 mV/PA
- Directional Pattern: Cardioid, Omni, Figure-8
- Impedance: ≤ 200 Ohms
- Equivalent Noise Level: 16dBA
- Max SPL for THD 0.5%: 135dB
- Supply Voltage: Phantom power +48V
- Connector: 3-pin XLR
- Weight: 598g
- Diameter: 51mm
- Length: 215mm
There are currently no reviews for this product.
Be the first the write a review.