Numark C3 USB Mixer
- Five-channel rack DJ mixer
- Inputs: three phono (RCA), eight line (RCA), three mic (1/4")
- Outputs: Balanced (XLR), Master (RCA), Record (RCA), Zone (RCA), Headphone (1/4" stereo)
- Two USB jacks, each assignable to input or output
- USB input for connecting computers for audio input
- USB output for recording gigs to computer
- Three-band EQ each channel
- Microphone channel with EQ
- Replaceable, assignable crossfader
- No software drivers needed for use with Windows XP/Vista or Mac OS X
- Works with almost any audio recording software
The Powerful Numark C3 USB Mixer is simply great! The Numark C3USB Mixer has a special design specifically for modern DJs, as for its amazing flexibility of USB for easy connection to a laptop for audio I/O for recording to a computer. The Numark C3-USB DJ Mixer has two USB ports, each described as an input or output. As inputs are incoming audio that can be mixed like any other input. Whereas outputs can send you mix out to a connected computer for recording. . The Numark C3 USB Mixer has a massive I/O range, giving; eight line (RCA), three phono (RCA), three microphone (1/4") inputs and master (RCA), zone (RCA) and record (RCA) outputs. The Numark C 3usb DJ Mixer also includes a steep, three-band EQ on every channel, No software drivers needed for use with Windows XP/Vista or Mac OS X and a replaceable crossfader. This awesome DJ Mixer works with almost any audio recording software. If this Mixer sounds great for you, then why not buy the Numark C3 USB Mixer NOW for a great price!
- Inputs:
- Line: 10Kohm input impedance; 77mV rms sensitivity for 1.22V output
- Mic: 600 ohm input impedance unbalanced; 1mv rms sensitivity for 1.22V output; 70mV rms max input
- Phono: 47Kohm input impedance; 1.2mV rms sensitivity @1KHz for 1.22V output
- Outputs:
- Line: 9V rms max
- Headphone: 0.5W into 47 ohm
- Distortion: less than 0.01%
- Signal to Noise Ratio (maximum output JIS-A weighted):
- Line: Better than 98dB
- Mic: Better than 86dB
- Phono: Better than 81dB
- Frequency response:
- Line: 20Hz-20KHz ±0.5dB
- Mic: 20Hz-15KHz ±0.5dB
- Phono: ±1dB except for controlled attenuation of –3dB @ 20Hz to reduce rumble and feedback
- EQ (Channel):
- Bass: +12/-32dB @60Hz
- Middle: +12/-32dB @1.2KHz
- Treble: +10/-28dB @15KH
- EQ (Mic):
- Bass: ±10dB @100Hz
- Treble: ±10dB @15KH
- Power consumption: 11 Watt typical; 14.7 Watt with full headphone output
- System requirements for USB functionality:
- PC: Windows XP (32-bit) or Vista (32-bit)
- Mac: OS X
- USB port